Arctic Fox with extension truss
Arctic Fox with extension truss
Freespool |
Jul 30 2016, 01:52 PM
Post
#1
|
Group: Members Posts: 167 Joined: 2-June 16 Member No.: 8,975 Favorite Truck Camper(s): Still deciding Type and Brand of Truck(s) Owned: 2016 GMC3500dualyy4x4diesel Type of Tiedowns used: Torklift with Fastguns Truck and Camper Setup: The plan will utilize a 3500 GMC with a 11 or 12' TC with a full compliment of Torklift hitch components and tie downs. Stable loads if needed will be installed. |
Here we go again. I realize this subject has been discussed but none of the contributors had my exact set up. Here is my thought, the 1140 Arctic Fox states the floor length is 11'4", add 2 inches for rear wall thickness and 4" for the stock bumper, that's 142" minus the 96" bed. This would suggest if the truss was 46" it would be flush with outside of the square tube stock bumper. So 48" would be what I would need. I am hoping someone on this board has the same rig and can confirm my estimations.
|
Lo-Fi Version | Time is now: 28th April 2024 - 01:45 PM |