exit hatch id needed
exit hatch id needed
Mace |
Jul 10 2008, 04:35 PM
Post
#1
|
Group: Members Posts: 1 Joined: 10-July 08 Member No.: 2,910 Favorite Truck Camper(s): Host Type and Brand of Truck(s) Owned: F350 CC, LB Diesel 4x4. Green.. Type of Tiedowns used: Happijac Truck and Camper Setup: As it stands, I am getting by with a 87 pilgrim 9.5' camper. But that will change soon... |
Sorry if this is a bit on the rudimentary but I cannot for the life of me find a replacement cover for my camper.
The camper is an 87 Pilgrim (I know, but it was cheap) The ID of the exit frame is 17.5 x 25" or so. The lid appears to bolt to the hinge with a 2" (or so) wide metal piece. I could be wrong on that because I have not been on top of the camper yet but that is how it looks from down low Any leads on where to get the part would be great. Most of the trailer shops here in town (vegas) do not cater to older stuff. |
BobC |
Jul 10 2008, 09:11 PM
Post
#2
|
Group: Members Posts: 51 Joined: 13-August 05 Member No.: 2 |
QUOTE(Mace @ Jul 10 2008, 04:35 PM) Sorry if this is a bit on the rudimentary but I cannot for the life of me find a replacement cover for my camper. The camper is an 87 Pilgrim (I know, but it was cheap) The ID of the exit frame is 17.5 x 25" or so. The lid appears to bolt to the hinge with a 2" (or so) wide metal piece. I could be wrong on that because I have not been on top of the camper yet but that is how it looks from down low Any leads on where to get the part would be great. Most of the trailer shops here in town (vegas) do not cater to older stuff. Here is an Exit Dome Ventline 14-1/2" x 21-1/2" Lid White. Not sure what size Vent lid you are in search of. |
Lo-Fi Version | Time is now: 29th April 2024 - 05:55 AM |