Crank lift system
Crank lift system
YETIRIDER |
Oct 6 2011, 08:03 PM
Post
#1
|
Group: Members Posts: 1 Joined: 5-October 11 From: Rocky Mountains Member No.: 5,661 Favorite Truck Camper(s): Hallmark Type and Brand of Truck(s) Owned: Ford Ranger 4x4 extended cab Type of Tiedowns used: Torklift front, tiedown straps rear Truck and Camper Setup: 2000 Ford Ranger 4x4 with Hallmark LaVeta popup, add a leafs |
I have a popup camper and I am thinking about installing a crank lift system for the roof. The way it works now is you have to push it up physically and it is a fairly strenous operation. I was wondering if anybody has done this or has any ideas? Thanks for any advice.
|
Dave D. |
Oct 7 2011, 01:09 AM
Post
#2
|
Group: Members Posts: 43 Joined: 25-November 10 Member No.: 5,037 Favorite Truck Camper(s): Looking for Pop-up Type and Brand of Truck(s) Owned: 2011 Silverado WT 1/2 ton Type of Tiedowns used: none yet Truck and Camper Setup: Still shopping |
I once had a folding camper with hard side walls. each end wall had two gas struts that did most of the lifting. Gas struts like the ones that lift the liftgates on Mini Vans were similar. If you have them they may be worn out.
|
Lo-Fi Version | Time is now: 28th March 2024 - 03:00 PM |