Just wondering if maybe anyone could be of any assistance..we have aquired
an older slide in camper that the company who made it has went out of
business and were having issues with lights/wiring..we cant seem to
figure out what wire goes to what..there is no plug just wires..There is
one black .one red .one green . And three faded white ones . . If you
have any ideas that might help it would be appreciated...we did have them working correctly then next time we started truck and tried lights when we turn on the turn signals both lights flash in the back...Sigh ty in advance for any advice!
Full Version: Newbie Woman needs wiring help
JustShar,
Wiring Code 7 way Trailer End # Color Gage Circuit Function connector interior
1 white 10 common ground
2 blue 12 electric brake
3 green 14 tail/running lights
4 black 10 battery charge (+)
5 red 14 left turn/stop
6 brown 14 right turn/stop
7 yellow 14 auxiliary/back up
NOTE: #7 is the center terminal and currently is most commonly used for backup lights.
These are the common colors used on campers, trailers, etc. If you look at your electrical panel, usually in the camper interior, you should be able to find the original colors of the white wires. Hope this helps
Wiring Code 7 way Trailer End # Color Gage Circuit Function connector interior
1 white 10 common ground
2 blue 12 electric brake
3 green 14 tail/running lights
4 black 10 battery charge (+)
5 red 14 left turn/stop
6 brown 14 right turn/stop
7 yellow 14 auxiliary/back up
NOTE: #7 is the center terminal and currently is most commonly used for backup lights.
These are the common colors used on campers, trailers, etc. If you look at your electrical panel, usually in the camper interior, you should be able to find the original colors of the white wires. Hope this helps
Many times wiring problems can be traced to a bad ground, make sure you have good wire to a good clean ground.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.